Today I wasn't in class and didn't have internet access, but later I made up for it by finishing all the videos. I also attempted all the worksheets, but I am not sure of some of them.
One thing I find very interesting is charge in electrostatics. I always imagined that there is something that makes a positive charge positive and a negative charge negative. I didn't realize that it, as the person says, can be called anything else (like "blue charge").
I knew roughly half of what was in that video, but Coulomb is new.
I looked at the Sound Waves and Beats lab report again but decided that it will have to hold off until school starts again so I can go see how exactly I can change it. Apart from this, there was nothing else to really report.
Saturday, 4 January 2014
Week 6: Day 2
Today I handed over the project to my group members to check if there is anything they want to add, remove, or modify. They looked over it and made some changes to the circuit diagram. I helped and made some suggestions.
Then later in class (Since there are some questions I need to ask) I needed to go over the Sound Waves and Beats lab report.
I did not have time to do the project at home, but I handed it to my group members to finish it. Later to make up for it I did the worksheets Circuits practice problems 1 and 2 again since last time there were errors and misunderstandings. Those were cleared after a few questions I asked in class.
Then later in class (Since there are some questions I need to ask) I needed to go over the Sound Waves and Beats lab report.
I did not have time to do the project at home, but I handed it to my group members to finish it. Later to make up for it I did the worksheets Circuits practice problems 1 and 2 again since last time there were errors and misunderstandings. Those were cleared after a few questions I asked in class.
Tuesday, 17 December 2013
Week 6: Day 1
Things so far are going according to plan. We continued to circuit diagram, though we did mess up a couple of times on the measurements. I continued it at home. Apart from that, there is nothing much to report.
Tomorrow I will finish illustrating the poster and writing the essay (requirement #4). If I don't finish it then it'll be holiday work.
Hopefully I can get some work done during the holidays, so this unit can be done in around 8 or 9 weeks.
Tomorrow I will finish illustrating the poster and writing the essay (requirement #4). If I don't finish it then it'll be holiday work.
Hopefully I can get some work done during the holidays, so this unit can be done in around 8 or 9 weeks.
Monday, 16 December 2013
Plan for Week 6
This week I am hoping to get the circuits project done, so that we would be free of it during the winter break.
At Home: Finish the circuit diagram on the poster from the outline. Print off any quotes we will need to explain what we have on the poster.
At Home: Finish illustrating the poster.
Day 1
In Class: Draw the circuit diagram on the poster from the outline.At Home: Finish the circuit diagram on the poster from the outline. Print off any quotes we will need to explain what we have on the poster.
Day 2
In Class: Illustrating the poster to make it look attractive. Use the quotes printed in Day 1: At Home.At Home: Finish illustrating the poster.
Day 3
(I won't be in class today, so class and home would be combined.)
Spend time watching videos, and do the quiz if possible. I'm hoping to finish watching all the videos posted.Week 5: Day 3
Today in class we brought the poster and started working on it. We named our project "Watts En Haut." "Watts" is for obvious reasons, and "En Haut" because we're doing the upper floor of my house, and "En Haut" is "upstairs" in French.
We decided on the poster layout: requirement number one, the circuit diagram, will be at the top while requirement number two, the floor plan, will be at the bottom. The drawing for the top part of the poster will be on the right, and the quotes/explanation will be on the left. The drawing for the bottom part of the poster will be on the left, and the quotes/explanation will be on the right. We measured it and drew the lines, and I drew a little cartoon light bulb next to the title, thinking that it will attract some viewers if there is a comic relief there. We started transferring the draft of the floor plan to our poster.
However, when we met up on Saturday to do the work, we discovered that the scale is tricky and we need to measure the dimensions. We went around the house measuring with a coil of wire that's a meter long. It is queer to measure the house out like this. Thankfully, we got the floor plan for the upper floor measured correctly and transferred down on the poster in a few hours time. We spent the rest of our time making note of all the electric appliances, but we could not discover how many watts each appliance has.
Again, we're taking things slow, but we expect a good grade on this.
We decided on the poster layout: requirement number one, the circuit diagram, will be at the top while requirement number two, the floor plan, will be at the bottom. The drawing for the top part of the poster will be on the right, and the quotes/explanation will be on the left. The drawing for the bottom part of the poster will be on the left, and the quotes/explanation will be on the right. We measured it and drew the lines, and I drew a little cartoon light bulb next to the title, thinking that it will attract some viewers if there is a comic relief there. We started transferring the draft of the floor plan to our poster.
However, when we met up on Saturday to do the work, we discovered that the scale is tricky and we need to measure the dimensions. We went around the house measuring with a coil of wire that's a meter long. It is queer to measure the house out like this. Thankfully, we got the floor plan for the upper floor measured correctly and transferred down on the poster in a few hours time. We spent the rest of our time making note of all the electric appliances, but we could not discover how many watts each appliance has.
Again, we're taking things slow, but we expect a good grade on this.
Wednesday, 11 December 2013
Week 5: Day 2
Today, with the rough draft of the floor plan completed, I started on the circuit diagram. I did not draw most of the circuit diagram myself; I just gave the floor plan and directed the drawing. It is a little different on how it really is, but that is fine.
It is difficult to pull off the drawing neatly and accurately with so many appliances to put in at each different rooms, but that is okay since it's just a rough draft.
At home I continued the draft and finished it.
Tomorrow I will buy the poster and copy this rough draft and the rough draft of the floor plan I did in the previous lesson down. It will be neater, and the circuit diagram will be color coded for each room, instead of having to draw walls. I will also watch videos and finish any leftover work.
It is difficult to pull off the drawing neatly and accurately with so many appliances to put in at each different rooms, but that is okay since it's just a rough draft.
At home I continued the draft and finished it.
Tomorrow I will buy the poster and copy this rough draft and the rough draft of the floor plan I did in the previous lesson down. It will be neater, and the circuit diagram will be color coded for each room, instead of having to draw walls. I will also watch videos and finish any leftover work.
Monday, 9 December 2013
Week 5: Day 1
Today in class we worked on the floor plan. I took a picture of the diagram on the board so that we can reference it later if we want to.
I continued the rough outline I did last class on the schematic drawing of floor plan, or requirement number two. I also cleared up the differences between number one and number two, as well as planned our poster layout. Two sheets- one showing the circuit diagram with proper labels (Note to self: color code each room and draw anything that is not a light bulb with a resistor symbol with a label of what appliance it is. If it's a light bulb, draw a light bulb.), and another showing the floor plan (Note to self: Label the appliances in the floor plan and include how many wattage each has)- will be side by side on the poster below the title. On the bottom of the poster will be number four, which we haven't started working on yet. Quotes will be put around empty spaces at the poster.
Due to the poor marks I got on the Sound Waves and Beats lab report, and the new tips, I looked over that in class as well in case there was any questions I needed to ask. I did not make any revisions yet.
At home, I continued the rough outline, or requirement number two. Once we get everything done on this rough outline, we'll create a neater one. I also did this blog post.
I continued the rough outline I did last class on the schematic drawing of floor plan, or requirement number two. I also cleared up the differences between number one and number two, as well as planned our poster layout. Two sheets- one showing the circuit diagram with proper labels (Note to self: color code each room and draw anything that is not a light bulb with a resistor symbol with a label of what appliance it is. If it's a light bulb, draw a light bulb.), and another showing the floor plan (Note to self: Label the appliances in the floor plan and include how many wattage each has)- will be side by side on the poster below the title. On the bottom of the poster will be number four, which we haven't started working on yet. Quotes will be put around empty spaces at the poster.
Due to the poor marks I got on the Sound Waves and Beats lab report, and the new tips, I looked over that in class as well in case there was any questions I needed to ask. I did not make any revisions yet.
At home, I continued the rough outline, or requirement number two. Once we get everything done on this rough outline, we'll create a neater one. I also did this blog post.
Subscribe to:
Posts (Atom)
